|
AquaBead
PLUS Systems (tm)
APS
1.75...includes AquaBead 1.75, 40 watt
PONDSTAR UV, 3/4 HP 2 speed pump mounted on pad...for ponds up to 2500 gal.....
APS
2.50...includes AquaBead 2.50, UVP 5 UV, 3/4
HP 2 speed pump mounted on a pad...for ponds up to 5000
gal........................
APS
4.25... includes AquaBead 4.25, UVP10
UV, 1 HP 2 speed pump mounted on a pad...for ponds up to 10,000
gal.....................APS
6.0... includes AquaBead 6.0, UVP 20
UV, 1.5 HP 2 speed pump mounted on a pad...for ponds up to 17,000
gal......................
APS
9.0... includes AquaBead 9.0,
UVP 20 UV, 1.5 HP 2 speed pump mounted on a pad...for ponds up to 25,000
gal......................
You
can add the AquaSieve to the above systems for an
additional or the VORTEK
SS for an additional.
The AquaBead + System(tm) is completely assembled, plumbed and mounted on a durable, all
weather pad at the Factory, then broken down into 7 modules that are ready to install when you receive
them.
Hook up is simple, we've done the hard part for you.
Just hand tighten the Quick Disconnect Unions
according to the enclosed diagram or click
here for instructions. In a space of 36" X 48" for the 3 smaller units and a
space of 48" X 72" for the 2 larger units you can have a filtration
system that can take care of your entire pond. You have everything that you need
on this system: Pre-filtration, Filtration, Pump and UV all in one.
Notice that all connections are made with Quick
Disconnect Unions. Why is this important? Ask us in a few years if
you need to make changes or repairs. With these unions, you won't have to get
out the hacksaw and start cutting. Just loosen the unions by hand and then
retighten by hand. You'll be glad you chose the AquaBead +
System (tm). We want you to be happy with your purchase, not only
immediately, but down the road, too.
We are always conscious of getting maximum flow out of our systems for energy
dollars spent to move water. That is why you will find we have used sweep
fittings on all water pathways throughout the system. This results in less
restriction and allows the use of energy efficient pumps to be used on all of
our systems. Less restriction means higher flow through and the use of more
efficient pumps means dollars saved on energy usage.
All
of the electrical components come with plug in cords, so just plug and play, no
praying necessary.
Sounds expensive doesn't it? Sit down. It's only an extra $
above the price of the equipment. You'll spend close to that in parts
alone, doing it yourself. Tell us you
want more info., or give us a call and we'll be happy to explain it to you.
|
AquaBead
+ System 